Drywall Repair
Whether due to accidents, wear and tear, or ecological elements, drywall can develop fractures, holes, or other types of damage. In this article, we will go over some of the most typical types of drywall damage and how to repair them.
Kinds Of Drywall Damage
Prior to we go over how to repair drywall, it is essential to comprehend the kinds of damage that can take place. The most common kinds of drywall damage consist of:
Cracks: These are little lines that can appear in the drywall due to motion or settling of your house. They can also occur due to temperature changes or making use of improper installation methods.
Holes: Holes can be caused by different aspects, including unintentional damage, hanging heavy objects, or eliminating hardware such as screws or nails.
Water Damage: Water damage is a typical type of drywall damage that takes place due to leaks, flooding, or high humidity levels. It can cause the drywall to swell, warp, or end up being discolored.
Dents: Dents can happen when the drywall is struck by a heavy things, such as furnishings or a door.
Popped Nails: This kind of damage occurs when the drywall nail becomes loose and pushes out of the wall, triggering a noticeable bump.
Fixing Drywall Cracks
Cracks are among the most common kinds of drywall damage. They are normally brought on by movement or settling of your house, temperature changes, or inappropriate installation techniques. The bright side is that fixing drywall cracks is reasonably simple.
To repair a fracture in drywall, follow these steps:
Clean the location around the crack with a drywall knife to remove any loose debris or drywall dust.
Apply a layer of joint substance over the fracture using a putty knife. Make sure to spread out the compound equally over the crack and feather the edges to develop a smooth surface.
When the joint compound is dry, sand the location lightly to eliminate any rough edges or bumps.
Repeat the procedure till the crack is completely filled and the surface is smooth.
Once the final layer of joint substance is dry, sand the location lightly to guarantee a smooth surface.
Lastly, prime and paint the area to match the surrounding wall.
Fixing Drywall Holes
Holes in drywall can be triggered by various factors, consisting of unintentional damage, hanging heavy things, or removing hardware such as screws or nails. Fortunately, fixing drywall holes is fairly simple.
To repair a hole in drywall, follow these actions:
Tidy the location around the hole with a drywall knife to get rid of any loose debris or drywall dust.
Cut a piece of drywall to fit the size of the hole. Make sure the new piece of drywall is a little larger than the hole.
Hold the new piece of drywall over the hole and trace around it with a pencil.
Cut along the pencil line with a drywall saw to remove the harmed drywall.
Apply joint substance around the edges of the hole utilizing a putty knife.
Location the brand-new piece of drywall over the hole and press it firmly into the joint compound.
Use a layer of joint compound over the new drywall patch, feathering the edges to create a smooth surface.
As soon as the joint substance is dry, sand the location lightly to remove any rough edges or bumps.